View M62292FP07_1270316.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

M62292FP
3.3 V, 1.8 V Fixed 2-Output Voltage DC/DC Converter
REJ03D0852-0300 Rev.3.00 Jun 15, 2007
Description
M62292FP is 3.3 V and 1.8 V fixed stable 2-output step-down DC/DC converter. It is possible to simplify peripheral circuit and to design compact and low cost sets because this device includes peripheral devices in small size 8-pin package. The IC also has Reset circuit with time delay that monitors power supply (VCC = 5 V) and one regulator output (Vout1 = 3.3 V; IN1 terminal), therefore an application system is protected system errors. Especially this is most suitable for application system with microprocessor and ASIC.
Features
* * * * * * 3.3 V and 1.8 V step-down converter 4 to 15 V wide input supply voltage (VCC = 5 V typ.) Reset circuit with time delay monitors Supply voltage (VCC = 5 V) and regulator output (3.3 V) 110 kHz fixed frequency oscillator without peripheral devices 8-pin SOP package
Application
Application system with microprocessor and ASIC
Block Diagram
VCC 4 Cd 6 IN1; 3.3 V 25 A Vref 1.25 V + - Comparator (3.3 V detect) + - Comparator (VCC detect) 0.6 A 7 RESET +
Oscillator (110 kHz)
VCC
Cout1 1
- + PWM comp. + - OP Amp 8 IN1 (3.3 V) 5 IN2 (1.8 V) + - OP Amp
- + PWM comp.
3 Cout2
2 GND
REJ03D0852-0300 Rev.3.00 Jun 15, 2007 Page 1 of 6
M62292FP
Pin Arrangement
M62292FP Cout1 GND Cout2 VCC 1 2 3 4 8 7 6 5 IN1 RESET Cd IN2
Outline: PRSP0008DE-C (recommend) PRSP0008DA-A (8P2S-A) (not recommend for new design)
REJ03D0852-0300 Rev.3.00 Jun 15, 2007 Page 2 of 6
M62292FP
Absolute Maximum Ratings
(Ta = 25C, unless otherwise noted)
Item Supply voltage Output current (DC/DC converter block) Output current (Reset block) Power dissipation Thermal derating Operating temperature Storage temperature Symbol VCC IO IORESET Pd K Topr Tstg Ratings 16 30 6 440 4.4 -20 to +85 -40 to +125 Unit V mA mA mW mW/C C C Conditions ch1, ch2 Ta = 25C Ta > 25C
Electrical Characteristics
(Ta = 25C, VCC = 5 V, unless otherwise noted)
Block All blocks Item Supply voltage Supply current Symbol VCC ICC VO1 VO2 Vreg-L Iin Iin fOSC TDUTY ICL Vsat Min 4.0 3.15 1.71 65 -1 Limits Typ 5.0 1.5 3.30 1.80 5 150 100 110 90 1.2 Max 15 2.8 3.45 1.89 15 450 300 160 1 2.0 Unit V mA V mV A A kHz % V V VCC = 12 V, VC = 12 V IO = 10 mA, Darlington connection VCC = 5 V detection ch1 output (3.3 V) detection Test Condition Without load ch1 output ch2 output VCC = 4 to 12 V ch1 ch2
DC/DC converter block Error Output voltage Amp. Line regulation Input current 1 Input current 2 Oscillator Output Oscillator frequency Maximum on duty Output leakage current Output saturation voltage Reset circuit block Reset Detecting voltage 1 circuit Hysteresis voltage 1 Detecting voltage 2 Hysteresis voltage 2 Cd output current Delay time RESET output current RESET low voltage RESET high voltage
Vs1 Vs1 Vs2 Vs2 IPD tpd IOC VOL VOH
3.6 30 2.46 30 -1.1 5 -40 0.8 VO1
3.8 50 2.58 50 -0.6 10 -25
4.0 80 2.70 80 -0.3 20 -17 0.2 VO1
V mV V mV A ms A V V
Cd = 4700 pF VCC = 5 V, VO = 1/2 x VCC IORESET = 4 mA
REJ03D0852-0300 Rev.3.00 Jun 15, 2007 Page 3 of 6
M62292FP
Reset Block Timing Chart
5V 3.85 V 3.80 V
VCC
0V
t
ch1 output (VO1)
3.3 V 2.63 V 2.58 V
0V
t
RESET output
VO1
tpd 0V
tpd
tpd
t
-3
Note:
tpd: RESET delay time*******************tpd (ms) 2.13 x 10 x Cd (pF)
REJ03D0852-0300 Rev.3.00 Jun 15, 2007 Page 4 of 6
M62292FP
Application Circuit (3.3 V and 1.8 V 2-output Voltage DC/DC Converter)
VIN (5 V) +
Cin 4
VOUT1 (3.3 V) Co1 + 8 IN1
VCC
Cout1 1
R2 R1
Q1 D1 L1 R4
M62292FP VOUT2 (1.8 V) Co2 + 5 IN2 RESET 7 Cd 6 Cd GND 2 Cout2 3
Q2 D2
R3 L2
3.3 V Line 1.8 V Line
MCU etc.
The Expression of Circuit Constants
Constants
TON TOFF (TON + TOFF) MAX TOFF (MIN) TON (MAX) L (MIN) lpk
Expressions
VO + VF VIN - VCE (sat) - VO 1 fOSC: 110 kHz (VCC = 5 V) fOSC (TON + TOFF) / ( 1 + 1 - TOFF fOSC (VIN - VCE (sat) - VO) x TON (MAX) lO lO + 1 lO 2 TON TOFF )
Note:
VF: Forward voltage drop of an external diode. Vsat: Output saturation voltage of an external switching transistor. IO: Set to 1/3 to 1/5 of maximum output current. Choose an external transistor, diode and inductor with peak current rating approximately greater than "Ipk".
REJ03D0852-0300 Rev.3.00 Jun 15, 2007 Page 5 of 6
M62292FP
Package Dimensions
JEITA Package Code P-SOP8-4.4x4.85-1.27 RENESAS Code PRSP0008DE-C Previous Code -- MASS[Typ.] 0.1g
*1
D
F
8
5
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE E
*2
Index mark
Terminal cross section ( Ni/Pd/Au plating )
1 Z e 4
*3
c
Reference Symbol
Dimension in Millimeters
bp
x
M L1
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
A
A2
Min Nom Max 4.65 4.85 5.05 4.2 4.4 4.6 1.85 0.00 0.1 0.20 2.03 0.34 0.4 0.46 0.15 0.20 0.25 0 8 5.7 6.2 6.5 1.12 1.27 1.42 0.12 0.10 0.75 0.25 0.45 0.65 0.90
JEITA Package Code P-SOP8-4.4x5-1.27
RENESAS Code PRSP0008DA-A
Previous Code 8P2S-A
MASS[Typ.] 0.07g
8
5
HE
*1
E
F
1
Index mark
4
NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET.
c
A2 A1
*2
D
Reference Symbol
Dimension in Millimeters
*3 e y
bp
D E A2 A1 A bp c HE e y L
Detail F
Min Nom Max 4.8 5.0 5.2 4.2 4.4 4.6 1.5 0.05 1.9 0.35 0.4 0.5 0.13 0.15 0.2 0 10 5.9 6.2 6.5 1.12 1.27 1.42 0.1 0.2 0.4 0.6
A
REJ03D0852-0300 Rev.3.00 Jun 15, 2007 Page 6 of 6
L
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2007. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0

▲Up To Search▲

Price & Availability of M62292FP07

	To Download M62292FP07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .